Amazing Dyeing Failures 2

The topic of my last post was failures in dyeing, and here’s more. First, my most serious and most annoying failure as a natural dyer.

3: Organic Indigo Failure

A while back, I experimented a bit with an indigo vat with fructose, but my results were not very convincing, in the sense that the amount of blue I got out of the vat was completely underwhelming given the amount of indigo that went in. Mona of Thread Gently on the Earth suggested trying another type of indigo vat that uses madder and bran. So, using what Mona wrote and what her source of the information, Aurora Silk wrote, I tried the madder/bran vat, since I’m still very interested in a natural fermentation vat for indigo.

In the beginning of May, I mixed 34 g of indigo, 17 g of ground madder, 17 g of wheat bran, and 116 g of sodium carbonate. I used at pot with a well-fitting lid, and filled with water so there wasn’t much air in the pot. We had a very warm early summer this year, so I just put the pot outside the house, where it was 27C during the day. But nothing happened. I had suspected that, since the pot would cool off during the night.

My next setup consisted of a simple electric hot plate for cooking. After a bit of experimentation, i figured out that on the lowest setting, and switching it on for 15 minutes out of every 2 hours with an electric timer plug, I could keep the vat around 37C. After a couple of weeks, though, I was forced to admit that nothing much was going on there.

So I started a bit of wild experimentation. Could it be lack of reducing power? I added fructose and more base, but that didn’t get the vat started. I then transferred part of the vat to a large jar, and tried warming it on a water bath. The jar was full and had a tightly closed lid, and that did improve things. The color didn’t shift to yellow-green, it was still blue with just the slightest green tinge (you can see it on the spoon, top left image above), but the jar vat developed the coppery film of a working indigo jar. I dyed small skeins, and they came out a lovely dusty blue.

indigo
Indigo dyeing with a madder/bran vat with a sprinkle of fructose along the way. The vat became slightly green-tinged (top left), but did develop the coppery film that shows it’s working (top right). Bottom, a small skein of yarn dyed dusty blue in the indigo jar.

So it’s sort of working – but not amazingly so. I can only dye very small skeins in this jar, but I did a lot of troubleshooting which may bring me closer to running a fermentation vat properly and over a long time. For now, I do consider it a failure, since I got so little blue out of my 34 g of indigo, but I’m clearly not done with this. Maybe one needs to set up a larger vat, using an amount of indigo that makes abandoning the vat unthinkable.

4: Common Broom Failure

I have tried – and failed – to grow dyer’s greenweed (Genista tinctoria) a couple of times. The seeds need cold stratification, which I have tried to give them, but they never sprouted. Dyer’s greenweed is supposed to grow wild in my part of Denmark, and I have searched for it, but not found it.  Then in June, the landscape was dotted with yellow: it was common (or Scotch) broom (Cytisus scoparius). This plant is considered invasive in many places, but not in Denmark, where it occurs naturally. But it has been spreading in a new way for the past 30 years, so picking it is definitely fine, just keep in mind that the seeds are poisonous.

I studied my old flora a bit, and since both dyer’s greenweed and common broom belong to the legumes (family Fabaceae), I convinced myself that common broom would be worth a try in the dye pot. At that time (June), the flowers were already past their prime, but i picked some branches at the roadside.

Common broom is spreading, adding splashes of yellow to the roadside.

The result was not impressive – good old failure beige once again:

Wool dyed with common broom – hello beige…

I would have called it a failure and left it at that if I hadn’t come across an entry on common broom in John & Margaret Cannon’s excellent book “Dye Plants and Dyeing” (I recently bought a second hand copy). This book tells you that the part of the plant used for dyeing is young branches, picked in April or early May, not the flowering stalks picked in June as I did. The young branches should produce shades of yellow-green with alum and green with copper. I might try this again next year.

“Dye Plants and Dyeing” also mentions some confusion in the dye literature between common broom and dyer’s greenweed, since the latter is sometimes referred to as dyer’s broom. Not surprisingly, Cannon & Cannon (in a book published in association with The Royal Botanic Gardens, Kew) recommend that the dyer relies on scientific nomenclature for dye plants. Actually the same conclusion is reached by Catharine Ellis in her run-in with “broom”.

5: Reindeer Lichen Failure

During my summer holiday, I gathered some lichen of the Cladonia family, I believe it’s reindeer lichen (Cladonia portentosa). In “Lichen Dyes: The New Source Book”, Casselman lists this lichen as a boiling water method lichen that should give a “leaf green” color. So into the dye pot it went, with a test skein of unmordanted wool, since lichen dyes are substantive. The result is not what I hoped. Beige, despite the fact that I used a large amount of lichen relative to yarn:

lichen
Reindeer lichen (Cladonia portentosa) and yarn dyed with the lichen.

6: Cold Dyeing Failure

mommywitch
Mommy is a witch. Check out my cauldron, a dye pot with mushrooms and wool.

At some point, I tried dyeing with old polypores, in the usual hot dyeing process, and that actually gave me a good yellowish brown. Recently, when cleaning up outside, a big hoard of old polypores surfaced. I don’t have enough space to store dyestuffs inside, so they were outside and were damp and looked like they would spoil.

I had a thousand other projects going, so I wasn’t really ready to dye with them – so I decided to try a very lazy experiment: cold dyeing (which I normally never do because it seems to me that it doesn’t really work). The experiment amounted to throwing the polypores into a bucket with rainwater that was just standing there, then put in a small, 12 g test skein of alum mordanted wool, and then letting it stand there for about 3 weeks. You have probably already guessed that it produced a smelly skein of beige wool, which I cannot even find now (I think I overdyed it with indigo). So all I have to show for this experiment is my 6-year old Dagmar’s drawing showing that “Mommy is a witch”. I am taking it as a compliment.

PS: Just as I wrote this, light samples of both the cold dye and hot dye with old polypores surfaced on my desk. None of them have the light-fastness achieved with fresh polypores in a hot dye bath.

Tagged , , , , , , , , , , , , , , , , ,

1 thought on “Amazing Dyeing Failures 2

  1. […] tried dyeing with common broom last year, but picked the plant too late in the season and got very little color out of it. In […]

Leave a Reply to Green Variations – Midgaards Have Cancel reply

Your email address will not be published. Required fields are marked *